10×10 Canopy Tent

10′ × 10′ Commercial Pop-Up Tent Setup

Two people are recommended for setup.

1. Place the tent frame
   Set the folded frame upright in the location where the tent will be used.
2. Open the frame completely
   Continue pulling opposite sides apart until the frame is fully open. Do NOT Force it.
3. Lock the frame
   Push each leg corner slider upward until it clicks and locks into place.
4. Secure the canopy top
   Attach all straps or fasteners underneath the canopy to the frame. Make sure the top is centered and snug.
5. Raise the legs
   With one person on each side, raise the legs one height setting at a time, it will click into place. Work around the tent until all four legs are at the same height.
6. Position the tent
   Adjust the tent into its final location before securing it.
7. Secure all four legs
   Properly stake or weight every leg before use. Never leave a pop-up tent unsecured.
8. Final check
   Make sure all four top corners are locked, the legs are even, the canopy is secure, and the tent is stable before use.

Important: Do not use the tent in strong winds or severe weather. Never leave the tent unattended if weather conditions become unsafe.